Crazy Horse
Braune Schmale Hosenträger
Optionen wählen
OUR SUSPENDERS ON YOU
CRAZY HORSE
Pick your size
Most people fit M/L
Our suspenders are cut close to one-size-fits-all, which is why many of our pieces come in M/L only. If your height sits right at the low or high end of a range, change accordingly.
S / M: 5'3" – 5'11"
M / L: 5'9" – 6'4"
XL / XXL: 6'3" – 6'10"
Measure your height
Stand against a wall, no shoes, with your heels together. Mark level with the top of your head and measure from the floor. Between sizes? Go for M/L, the straps adjust on either side.
Need a custom size? We've got you. Email our founder Mike at mike@wiseguyoriginal.com and he'll help you personally.
HOW OUR PRODUCTS ARE MADE
CUSTOMIZE YOUR LOOK
Wiseguy Original Suspenders let you switch up your style easily. Choose from lobster hooks, clips, loop clips and our special Wiseguy Original monogram buttons. Explore these options in our shop. Plus, every pair of Wiseguy Original Suspenders comes with extra attachment options, giving you more ways to personalize your look.
Width:
- Schmal, 2,5 cm
Composition:
- Authentisches Nubukleder in der Farbe Dunkelbraun
Attachment Parts:
- Front: 2 Karabinerhaken (schmal)
- Back: 1 Loop-Clip
- Extra: 3 Clips (schmal), 2 Karabinerhaken (schmal), 1 normaler Bolzen
Hardware:
- Metallteile in der Farbe Messing
Model:
SKU:
- L2010-DB-S/M
Instruction Video
STEP 1
GRAB A FLAT SCREWDRIVER
To swap the ends of these suspender straps, you'll need a small flat screwdriver. Start by examining the strap, where a small metal stud adjusts the size of the suspenders. Also take note of the leather loop that can slide up and down.
STEP 2
UNSCREW THE STUD
There's a screw holding the metal stud in place. Unscrew the stud using the small flat screwdriver, turning counterclockwise. Move the leather loop over the metal stud to open up the strap. Once you've taken off the stud, slide off the current attachment style from the strap.
STEP 3
SLIDE ON THE NEW END
Now, put on the new piece you want to use instead. Place the stud back onto the suspenders, lining it up with the screw hole. Use the small flat screwdriver to tighten the screw and keep the stud in place. Slide the leather loop back over the metal stud toward the ends of your suspender strap. Your suspenders are now good to go.
