The Hershel Flex
Brown Wide Suspenders
These rugged Suspenders feature Brown leather front straps and a Black elastic back strap, in our wide width size (1.36 inches / 3.5 cm). Accompanied by brass-colored metal buckles on the front and a slider in the back, these suspenders are easily adjustable to fit you just right.
Choose options
HERSHEL FLEX
CUSTOMIZE YOUR LOOK
Wiseguy Original Suspenders let you switch up your style easily. Choose from lobster hooks, clips, loop clips and our special Wiseguy Original monogram buttons. Explore these options in our shop. Plus, every pair of Wiseguy Original Suspenders comes with extra attachment options, giving you more ways to personalize your look.
Width:
- Wide , 1.36 inch / 3,5 cm
Composition:
- European elastic webbing in the color Black
- Authentic Nubuck leather parts in the color Dark Brown
Attachment Parts:
- Front: 2 Lobster Hooks (Slim)
- Back: 1 Clip (Slim)
- Extra: 3 Clips (Slim), 2 Lobster Hooks (Slim), 1 Rivet, 1 Normal Stud
Hardware:
- Metal parts in color Brass
SKU:
- L7013-DB-M/L
Instruction Video
STEP 1
GRAB A FLAT SCREWDRIVER
To swap the ends of these suspender straps, you'll need a small flat screwdriver. Start by examining the strap, where a small metal stud adjusts the size of the suspenders. Also take note of the leather loop that can slide up and down.
STEP 2
UNSCREW THE STUD
There's a screw holding the metal stud in place. Unscrew the stud using the small flat screwdriver, turning counterclockwise. Move the leather loop over the metal stud to open up the strap. Once you've taken off the stud, slide off the current attachment style from the strap.
STEP 3
SLIDE ON THE NEW END
Now, put on the new piece you want to use instead. Place the stud back onto the suspenders, lining it up with the screw hole. Use the small flat screwdriver to tighten the screw and keep the stud in place. Slide the leather loop back over the metal stud toward the ends of your suspender strap. Your suspenders are now good to go.
Instruction Video
STEP 1
LOCATE THE RIVET
Look at the ends of the suspender straps, note the metal rivet on the back of the leather connector part. The metal rivet keeps the ends of the leather together, creating a space for the attachment part to fit in.
STEP 2
WIGGLE IT OPEN
To get started, gently wiggle open the leather cover to reveal the space where the attachment part sits.
STEP 3
SLIDE ON THE NEW END
Now, slide off the current attachment part from the leather connector. Next, introduce the new attachment style you prefer and slide it into the designated space. Lastly, close the leather end by aligning the metal rivet with its original position. Give it a gentle push until the metal rivet pops out again.
